Specificaties
| Product | Drum Carder |
The carder is available in 46 tpi (teeth per square inch) and 72 tpi. If you are mainly going to card coarser wool or greasy fleece, it is best to go for 46 tpi. If you mainly carding finer fibres, the carder with 72 tpi is most suitable.
The carding cloth is made of nickel-plated steel wire on a bed of cotton and natural rubber, which gives very good longevity. The frame of the carder is made of waterproof glued birch plywood with a white HPL top layer. The rollers are driven by a closed gear system. As a result, the carder requires very little maintenance and this keeps fiber from getting caught up in the gears.
The carder is delivered fully assembled so you can get started right away.
Included with the carder are:
- instruction manual,
- the card booklet written by Deb Menz,
- cleaning brush,
- doffer pin
- tafelklemmen
Bij kaardmolens wordt als regel de versnelling tussen de walsen vermeld. Deze is voor de kaardmolen Junior 4:1. Belangrijker echter voor de effectiviteit van het kaarden is het verschil in oppervlaktesnelheid tussen de grote en de kleine wals. Hiervoor vermenigvuldig je de versnelling met de verhouding van de diameters van de beide walsen. Voor de kaardmolen Junior is deze snelheidsverhouding 9:1.
Product codes
KP0104: Kaardmolen Standard 72 tpi
KP0115: Kardmolen Standard 46 tpi
Additional information
| Capacity | approximately 120 gram per batt |
|---|---|
| Speed ratio | ongeveer 78 x 19 cm |
| Speed ratio | 9:1 |
| Carding cloth | 46 or 72 teeth per square inch (tpi) |
| Wood type | Waterproof birch plywood with white HPL top layer |
| Net weight | 7.5kg |
Reviews
There are no reviews yet.